2012 CATERPILLAR 289C2

2012

CATERPILLAR

289C2

2 887

CAT0289CTJMP02980

Occasion

Machine Highlights Year: 2012 Make: CAT Model: 289c Cab Standard flow Joystick Controls Teeth bucket AC/Heat 2 speed 82 HP Operating Weight: 10365lba Hours: 2887 SN: CAT0289CTJMP02980 Engine Number of cylinders : 4 Engine make : Caterpillar Engine model : Cat C3.4 DIT / C3.4T Gross power : 84 hp Net power : 82 hp Rated engine speed : 2,500 rpm Displacement : 201 cu in Bore : 3.7 in Stroke : 4.7 in Aspiration : Turbocharged Gross power—SAE J1995 : 84 hp Net power—SAE J1349 : 82 hp Dimensions Width over tracks : 6.5 ft (78 in) Height to top of cab : 6.95 ft Ground clearance : 9.1 in Clearance at maximum lift and dump : 8.06 ft (96.7 in) Reach at maximum lift and dump : 2.57 ft (30.7 in) Length of track on ground : 69.6 in (5.8 ft) Length with bucket on ground : 144.81 in Length without bucket : 116.5 in (9.72 ft) Length with bucket : 12.08 ft Bucket pin height at maximum lift : 10.63 ft Bucket pin reach at maximum lift : 14.6 in Bucket pin height at carry position : 7.7 in Departure angle : 44 degrees Maximum dump angle : 50 degrees Maximum overall height : 160.7 in Maximum reach with arms parallel : 50.5 in Overall track length : 89.4 in Rack-back angle at maximum height : 85 degrees Turning radius from center to bucket : 91.1 in Turning radius from center to coupler : 57.9 in Turning radius from center to rear : 64.6 in Undercarriage Ground contact area : 2,504 sq in Ground pressure : 4.1 psi Operational Specifications Operating weight : 10,365 lb Rated operating capacity at 50% tipping load : 3,850 lb Rated operating capacity at 35% tipping load : 2,695 lb Rated operating capacity with optional counterweight : 4,101 lb Tipping load : 7,721 lb Breakout force—tilt cylinder : 7,308 lb Operating voltage : 12 V Alternator output : 90 amps Maximum speed—low range : 5.1 mph Maximum speed—high range : 8.5 mph Powertrain Forward travel speed—standard : 5 mph Reverse travel speed—standard : 5 mph Forward travel speed—two-speed : 8.5 mph Reverse travel speed—two-speed : 8.5 mph Loader Breakout force : 7,308 lb Rated operating load : 3,850 lb Bucket capacity : 0.6 cu yd Tipping load : 7,721 lb Hydraulic System Standard hydraulic flow : 22 gal/min Standard hydraulic pressure : 3,335 psi High-flow XPS maximum flow : 33 gal/min High-flow XPS maximum pressure : 4,061 psi Hydraulic power : 42.8 hp Hydraulic system capacity : 15 gal Hydraulic tank capacity : 11 gal Service Refill Capacities Fuel capacity : 26 gal Cooling system capacity : 3.7 gal Engine crankcase capacity : 2.6 gal Hydraulic tank capacity : 11 gal Hydraulic system capacity : 15 gal Cab and Safety ROPS standard : SAE J1040 MAY94 / ISO 3471:1994 FOPS standard : SAE J1043 SEPT87 / ISO 3449:1992 Level I FOPS Level II standard : SAE J231 JAN81 / ISO 3449:1992 Level II 2012 CATERPILLAR STANDARD FLOW CAB LOADER SKID STEER WITH JOYSTICK CONTROLS, TEETH BUCKET, AC/HEAT, 2 SPEED WITH AN OPERATING WEIGHT OF 10365LBS. SE HABLA ESPAÑOL! FINANCING AVAILABLE PLEASE CALL US WITH ANY QUESTIONS! ASK ABOUT OUR REASONABLE SHIPPING RATES!

Oui

98,04 L

1 746,33 kg

4 701,48 kg

3 502,19 kg

3 314,85 kg

83,28 lpm

Cabine

Oui

Oui

23,11 cms

295,91 cms

367,82 cms

61,15 kW

CAT